m menu image  m home m cart

Results Guaranteed

Testimonials

Key to Enduro Victory

Key to Enduro Victory

Team Sahlen competes in Long Endurance Races. These are not your ordinary 90 minute enduros. No,were talking long, long races, 9 to 14 hours long,...
Read More ->


Worked Great in Race Conditions

Worked Great in Race Conditions

With the Hard Brakes backing plates installed, we noticed overall improved braking performance in the H-Stock BMW 135i car immediately. With one of...
Read More ->


Track Wisdom

"Fluid fade... happens when the temperature of the caliper cylinder (or the piston) reaches the boiling point of the brake fluid and tiny bubbles of compressible gas form in and are diffused through the previously incompressible brake fluid. The pedal then goes to the floor, giving rise to frantic pumping of both the brake pedal and the driver's heart[...] Basically, if the pedal goes all soft and horrible you [...] have boiled the brake fluid. The only cure is to either upgrade the fluid or keep it cooler. This can be achieved either by increasing the cooling to the caliper or by insulating the caliper pistons."

-- Carroll Smith, Engineer to Win

D609 Titanium Brake Heat Shields for Audi, Ferrari, Porsche, StopTech ST-40 Calipers

(scroll down for complete application list)

Starting at: $78.99
Sale: $55.29
Special: 30% off

Product Options: (Which Option is Best?)

Material




Set Size:

4 Shields for 2 Inner + 2 Outer Pads

  Number of Sets:    


  • 5This Model is in Stock.

Description

New and Improved! This model has been improved for a more precise fit in a wider range of calipers.

Improve your brake performance, reduce your maintenance costs, and increase your safety.

Hard Brakes titanium alloy brake shields provide a thermal barrier between your glowing hot rotors and your brake caliper and hydraulic brake fluid. This helps prevent heat damage to caliper seals and dust boots, as well as preventing overheating of brake fluid which can cause sudden loss of braking power. The primary benefits to you are better and more consistent braking on the track, saving time and $$ on repairs, and helping you keep your car on the track longer. Our top-grade titanium alloy heat shields are used by top professional racing teams in race series like SPEED World Challenge and Rolex Grand-Am, and give your track car the same brake heat mitigation materials used by major performance brake caliper manufacturers for a small fraction of the cost.

Hard Brakes titanium brake heat shields installed in brake caliper. Each shield is precisely designed to provide maximum coverage of the brake pad surface and to hook securely over the caliper pins for a quick and reliable installation that allows them to be re-used over and over again. Unlike some knock-off imitators, our heat shields have a smooth polished finish that is free of surface contaminants or burrs. We also are unique in taking special attention to providing cutouts and punchouts for mounting clips and other protrusions on the brake pad. Photo of a set of 4 titanium brake heat shields. In addition to our lab testing, our shields have been track tested and proven by legions of drivers around the world. Take advantage of our satisfaction guarantee and prove it to yourself! Pricing is per-axle (i.e. front or rear axle, each set includes 4 shims, one for each brake pad on the axle). We also recommend a packet of our ceramic racing brake lubricant with or without our heat shields, to ensure that all brake components are moving smoothly and to reduce brake noise.