m menu image  m home m cart

Results Guaranteed

Testimonials

Essential for Production Race Cars

Essential for Production Race Cars

I remember the days in the 80s and 90s, when one of the key skills in driving a production race car was keeping from bending your brake pad backers. ...
Read More ->


Works Great for Sprint Cars

Works Great for Sprint Cars

Opening night we didn't have your product installed. Kind of hard on the brakes and they responded as I was used to. Next night, Your product...
Read More ->


Track Wisdom

"Very high [brake] temperatures can also cause the brake fluid to boil with a resultant increase in pedal travel. This should be detected immediately by the driver, as a very small quantity of boiling fluid is enough for the pedal to go right to the floor without any effect; in contrast to the liquid brake fluid, the boiling part is compressible. It is particularly important that when the car has been stopped for a short time -- up to 15 or 20 minutes after a drive in which the brakes have become very hot -- the pedal is depressed for a check. When the car is at rest, brakes act as a heat sink from which heat spreads to the fluid contained in the calipers; brakes which were fully operative when the car was driven may have become totally inefficient after it has stood awhile."

-- Paul Frere, Sports Car and Competition Driving

All Testimonials




Key to Enduro Victory

Monday 25 July, 2016



Key to Enduro Victory

Team Sahlen competes in Long Endurance Races. These are not your ordinary 90 minute enduros. No,were talking long, long races, 9 to 14 hours long, with even some of those events being 24 hours long. When a race is this long, you can’t take a chance that you would run out of brakes. This is why Team Sahlen utilizes the Titanium Brake Backing Plates made by HARD BRAKES. Team Sahlen Driver Will Nonnamaker shared his thoughts “We recently secured the overall victory at the American Endurance Racing 9 hours at Watkins Glen International with our Porsche Caymans. Watkins Glen is known for being a track hard on brakes. But throughout the race, we had a solid brake pedal, with no fade. And even at the end, we were still driving hard into the turns. I strongly believe this is due to our utilizing the HARD BRAKES heat shields to prevent heat transfer during the grueling 9 hours.
Testimonial By: Will Nonnamaker — Team Sahlen GT Driver



Essential for Production Race Cars

Thursday 02 October, 2014



Essential for Production Race Cars

I remember the days in the 80s and 90s, when one of the key skills in driving a production race car was keeping from bending your brake pad backers. What I wouldn't have done to have had the Hard Brakes component back in those days. I know that the Hard Brake will certainly provide us with a fantastic opportunity to still have great brakes at the end of the race.
Testimonial By: Joe Nonnamaker — Continental Tire Champion Racer — Team Sahlen



Endurance Racing "Must Have"

Tuesday 30 September, 2014



Endurance Racing "Must Have"

We had not raced in the Continental Tire Series for a few years, so stepping back into this world, we knew that there would be some new things to learn. When Hard Brakes reached out and contacted us, I was excited to learn about their product, since we knew this would be a problem with production based race cars. We have been very happy with the product and its useful assistance in Endurance racing application where continued stopping power is crucial.
Testimonial By: Jay Chapman — Multiple Continental Tire Series Champion — Phoenix ProMotions Team Manager



Works Great for Sprint Cars

Thursday 05 June, 2014



Works Great for Sprint Cars

Opening night we didn't have your product installed. Kind of hard on the brakes and they responded as I was used to.

Next night, Your product installed and on the brakes a lot. What a difference. The pedal was hard and I really noticed how they grabbed more than ever before. The only thing that was different was we had Hard Brakes titanium backing plates installed.

They work. Thank you.
Testimonial By: Jeff Wilke — SPRINT Car Multiple Winner — Wilke's Racing Team



World Challenge GTS Success

Friday 08 June, 2012



World Challenge GTS Success

we had a LOT of success this weekend in the Hard Brakes Ti backing plates helping control the extreme temps of our factory Nismo calipers... We were able to document appx a 20 degree decrease in caliper temps and that was exactly what we were hoping to net, in order to help keep our fluids from reaching a critical boiling point under certain conditions... Thanks for all your assistance guys!
Testimonial By: Greg Shaffer - SCCA WC Driver #52 — GTS Nissan 370z Nismo - World Challenge / 2012




Back