m menu image m home m cart

Technical F.A.Q.

Results Guaranteed

Testimonials

World Challenge GTS Success

World Challenge GTS Success

we had a LOT of success this weekend in the Hard Brakes Ti backing plates helping control the extreme temps of our factory Nismo calipers... We were...
Read More ->

Awesome results for BMW 135i

Awesome results for BMW 135i

How did it go? ... VERY WELL! We can now complete one full session which we have never done before due to the brakes overheating and the pedal...
Read More ->

View All Testimonials

Track Wisdom

"Fluid fade... happens when the temperature of the caliper cylinder (or the piston) reaches the boiling point of the brake fluid and tiny bubbles of compressible gas form in and are diffused through the previously incompressible brake fluid. The pedal then goes to the floor, giving rise to frantic pumping of both the brake pedal and the driver's heart[...] Basically, if the pedal goes all soft and horrible you [...] have boiled the brake fluid. The only cure is to either upgrade the fluid or keep it cooler. This can be achieved either by increasing the cooling to the caliper or by insulating the caliper pistons."

-- Carroll Smith, Engineer to Win

What should I do with my existing (OEM) shims?

What should you do with the existing (OEM) shims on your brake pads when installing our titanium brake heat shields? There is no single best answer to that, because of the variety of OEM shims out there. Some OEM shims are designed for noise damping while others are for blocking heat from the brake pads. Some are made from rubber like material, others from steel. Some have damping springs, others do not.

A good rule of thumb is that if the existing shim looks like stainless steel then you probably want to try to keep it on in addition to the new titanium brake shim. Although stainless steel is not as good a thermal insulator as our 6Al-4V titanium alloy, every little bit helps. If the existing shim is a softer metal such as welder's steel or aluminum, then go ahead and get rid of it.

If you are having trouble fitting your new titanium shims in with the existing shims, then you should probably go without the existing ones and use titanium only for maximum thermal protection. If you have any questions about the installation please don't hesitate to contact us.