Testimonials
I forgot to get back to you on those shields for the PBR twin piston Mustang/Corvette calipers.They definately work as I haven't boiled my fluid...
Read More ->
Winning Tech for Dodge Viper Cup
Another Dodge Viper Cup win for us! Thanks for the heat shields! The brakes were working overtime with 100 lbs of rewards weight on the car (and also...
Read More ->
Specials
DPF7876 Titanium Brake Shim for Alcon, Mitsubishi EVO FQ
Sale: $68.59
Special: 30% off
Track Wisdom
Got any hard numbers on temperature reduction?
Test Results Prove Titanium Heat Shield Effectiveness
We don't expect you to buy our brake heat shields based on blind faith. Our track testimonials give numerous examples of real world results at the track in racing conditions. In addition, we have conducted laboratory experiments to quantify the effectiveness of our titanium brake shims. We took a normal brake pad and put it in contact with a 960F heat surface and measured the temperature at the back of the pad over time. This is measuring the temperature at the contact area where the brake caliper piston would meet the back of the pad, and where heat transfer into your brake fluid and hydraulics system begins to occur. After measuring the results with no heat shield in place, we ran the same experiment with our standard titanium shim placed at the back of the pad (again, where the brake caliper piston would press against the pad/shim).
The results showed a very significant reduction in temperatures over time, as shown in the chart below. After 10 minutes of exposure to the heat source, the unshielded brake pad measured 547F at the caliper interface. In comparison, the pad with the titanium heat shield measured only 404F, a reduction of 143F degrees!
As this test result proves, our titanium heat shields are effective at creating a "thermal break" or barrier between your glowing hot pads and rotors and your brake hydrualic system. The benefits to you are reduced brake fade from brake fluid boiling, increased brake fluid life, and increased life for your brake caliper components such as caliper seals, dust boots etc.