m menu image  m home m cart

Results Guaranteed

Testimonials

World Challenge GTS Success

World Challenge GTS Success

we had a LOT of success this weekend in the Hard Brakes Ti backing plates helping control the extreme temps of our factory Nismo calipers... We were...
Read More ->


Worked Great in Race Conditions

Worked Great in Race Conditions

With the Hard Brakes backing plates installed, we noticed overall improved braking performance in the H-Stock BMW 135i car immediately. With one of...
Read More ->


Track Wisdom

"Very high [brake] temperatures can also cause the brake fluid to boil with a resultant increase in pedal travel. This should be detected immediately by the driver, as a very small quantity of boiling fluid is enough for the pedal to go right to the floor without any effect; in contrast to the liquid brake fluid, the boiling part is compressible. It is particularly important that when the car has been stopped for a short time -- up to 15 or 20 minutes after a drive in which the brakes have become very hot -- the pedal is depressed for a check. When the car is at rest, brakes act as a heat sink from which heat spreads to the fluid contained in the calipers; brakes which were fully operative when the car was driven may have become totally inefficient after it has stood awhile."

-- Paul Frere, Sports Car and Competition Driving

D592 Titanium Brake Pad Backing Plate for Brembo, CTS, Viper, Ferrari, Jaguar, Lamborghini, Mustang, Lotus, Volvo

(scroll down for complete application list)

Starting at: $61.99
Sale: $43.39
Special: 30% off

Product Options: (Which Option is Best?)

Material




Set Size:

4 Shields for 2 Inner + 2 Outer Pads

  Number of Sets:    


  • 14This Model is in Stock.

Description


Improve your brake performance, reduce your maintenance costs, and increase your safety.

Hard Brakes titanium alloy brake shields provide a thermal barrier between your glowing hot rotors and your brake caliper and hydraulic brake fluid. This helps prevent heat damage to caliper seals and dust boots, as well as preventing overheating of brake fluid which can cause sudden loss of braking power. The primary benefits to you are better and more consistent braking on the track, saving time and $$ on repairs, and helping you keep your car on the track longer. Our top-grade titanium alloy heat shields are used by top professional racing teams in race series like SPEED World Challenge and Rolex Grand-Am, and give your track car the same brake heat mitigation materials used by major performance brake caliper manufacturers for a small fraction of the cost.

Hard Brakes titanium brake heat shields installed in brake caliper. Each shield is precisely designed to provide maximum coverage of the brake pad surface and to hook securely over the caliper pins for a quick and reliable installation that allows them to be re-used over and over again. Unlike some knock-off imitators, our heat shields have a smooth polished finish that is free of surface contaminants or burrs. We also are unique in taking special attention to providing cutouts and punchouts for mounting clips and other protrusions on the brake pad. Photo of a set of 4 titanium brake heat shields. In addition to our lab testing, our shields have been track tested and proven by legions of drivers around the world. Take advantage of our satisfaction guarantee and prove it to yourself! Pricing is per-axle (i.e. front or rear axle, each set includes 4 shims, one for each brake pad on the axle). We also recommend a packet of our ceramic racing brake lubricant with or without our heat shields, to ensure that all brake components are moving smoothly and to reduce brake noise.

TS-T-D0592  Brake Backing Plate Heat Shielding Shims

Fitment Guide [(F) = Front, (R) = Rear]